Bromine Tablets

It is a violation of federal law to use this product in a manner inconsistent with its labeling.

Keep pH between 7.2 and 7.6 and never allow it to fall below 7.0. The treatment necessary for your pool or spa will change considerably depending on those factors that burden the disinfection system. Some of the factors that will vary the required treatment are water temperature, bather load, exposure to windblown debris, thunder or rain storms and length of filtration cycles.

Spas & Hot Tubs: Before initially using Brominating Tabs in your spa or hot tub you will need to add ½oz sodium bromide for each 100 gallons of water. The same treatment should be followed each time you drain and refill your spa or hot tub with fresh water.

Introduce 3 tablets per 300 gallons of spa water with the use of a floating tablet feeder or automatic brominator installed on the spa equipment.

Adjust tablet feeder or brominator to obtain and active bromine residual of at least 2ppm. Maintain spa by adding 3 tablets per 300 gallons every 5-7 days or as needed to maintain an active bromine residual of 2ppm at all times.

Spa water has a tendency to foam and cloud; this is directly proportional to the amount of spa use. Cloudiness is due to the accumulation of body fats, oils and contaminants too small for the filtration equipment to remove, and is linked to rapid escalation of total dissolved solids in water.

To a great extent, defoamers, clarifiers, as well as shock treatments, demineralizers, or sequestering agents can be used to clear water. When water clarification can not be achieved, draining, cleaning and refilling the spa is recommended.